Rust Clean & Protect
RXSOL Rusto Bright
SKU: RXSOL-16-1694-025
A chemical Brighting prepration for polishing product, RXSOL RUSTO BRIGHT is a mixture of concentrated inorganic acid for brightening and chemically polishing , Aluminium,copper and copper based alloys. It is an acid form also containing surfactant,suppressant and inhibitor for chemical poli shing (bright dipping) of most non ferou alloys. This formulation is widely used commercially. RXSOL-16-1694-025 contains additives to reduce nitrogen oxide fumes and to enhance the brightening ability.
Application
- Brightening and chemically polishing of copper alloy components such as fasteners, valves, and wire.
- Prepare surface for electroplating
- Deoxidize copper alloys
Dosage
Use as received to immerse and agitate the parts for 1 - 3 minutes, depending on the condition of the parts before dipping and the desired results. Before dipping, parts should preferably be as chemically clean as before electroplating, but degreasing is adequate, although some shortening of bath life may be expected. Temperature should be kept below 90F for best results. For heavy production, some form of cooling may be required.
Following the dip, rinsing must be thorough to remove the viscous acids remaining on the parts.For subsequent electroplating or water-dip lacquering, no further treatment is required. If the parts are to be dried, a further dip in Quik-Dri 1000 will insure spot free drying and will aid in the tarnish prevention.
Technical Specifications
Appearance – Transparent Liquid
Sp. Gr. At 25 C - 1.15 to 1.2
PH Value - 2.0 to 2.5
Water Compatibility - Should be water compatible.
Stickness – Non Sticky & Free flowing
