Caustic Soda for Bottle Washing in Beverage and Dairy Plants
Returnable glass bottles have to come back from the market clean, label-free and safe to refill. In beverage and dairy plants, the bottle washer does this job, and hot caustic soda is the heart of the process. This guide explains how caustic is used and how to control it.
What the caustic does
- Removes dirt and residues left in returned bottles.
- Loosens and removes labels and label glue.
- Kills microorganisms through the combination of alkali, temperature and contact time.
Typical operating conditions
Bottle washers commonly run their main caustic bath at around 1.5 to 3% NaOH and 60 to 80 °C, with the contact time set by the machine design. Many plants add a washer additive to improve label removal, reduce foam and prevent scale. Follow the washer maker's and additive supplier's settings.
Keeping the bath in control
- Test caustic strength every shift by titration or conductivity.
- Top up with caustic solution to keep within range; label pulp and carry-over gradually dilute and contaminate the bath.
- Remove labels and pulp regularly from the label extraction system.
- Check rinse water after the caustic zones to make sure no alkali is carried into the bottles. Use phenolphthalein checks on rinsed bottles.
- Change or regenerate the bath when contamination makes it ineffective.
Common problems
- Labels not coming off: low caustic, low temperature, or label glue not suited to caustic washing.
- Scuffed or white-hazed bottles: scale from hard water, or caustic too strong.
- Foam: wrong additive or contamination from returned product.
Safety
Hot caustic splashes cause severe burns. Use face shields, gloves and aprons during testing and top-ups, lock out the machine during maintenance, and keep eyewash stations nearby.
Supplying plants in Oman
For beverage and dairy companies with plants in Oman, caustic soda flakes 99% are available from ready stock in Barka, with the daily price and documents at muscatchemical.com.