RXSOL
RO Chemicals
Antiscalant Antifoulant Corrosion Inhibitor 704
SKU: RXSOL-33-3337-025
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.
Application
For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.
Dosage
Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:
| Temperature | Maximum Dilution % |
| 30°C | 10 |
| 30 – 35°C | 25 |
| >35°C | 50 |
Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions
Technical Specifications
Form: Clear liquid
Color: Light yellow
Specific Gravity: >1
pH value: 4.5 - 5.5 ( Effective over a broad pH range 5 - 9 Compatible with feed waters that contain aluminum and iron oxides )
Solubility in water: 100% soluble
