RXSOL
Metal Treatment
Aquasol Corrosion Inhibitor RX
SKU: RXSOL-16-4153-025
Aquasol Corrosion Inhibitor RX protect components from corrosion during transport and storage . This environmentally-friendly product is a substitute for sodium nitrite-based alternatives. Aquasol corrosion inhibitor is added to rinse water for either spray or immersion rinse during cleaning, and provides long term protection against moisture and humidity for ferrous components. Protection may last up to six months, depending on storage conditions, and post-treatment processes such as brazing, bonding, and painting are not affected. The molecular layer of Aquasol Corrosion Inhibitor Rx protection is invisible and non-tacky, and does not affect adhesion. Aquasol Corrosion Inhibitor contains no nitrites or phosphates. It is non-combustible, non-hazardous to the environment, and non bio-accumulating.
Application
A rinse additive in spray or immersion systems to protect ferrous metals against corrosion for up to 6 months. The Vapour Corrosion Inhibitors form an invisible coating on metal surfaces providing protection against moisture and humidity, whilst not affecting adhesion or the properties of post treatment processes such as painting, bonding, brazing.
Dosage
Used diluted at 2-4% in demineralised water for best results. It is used at temperature 50-60°C by immersion or spray for about 30-60 seconds to ensure good contact over the whole surface. The parts should then be allowed to dry and cool completely before packing or storage.
Technical Specifications
| Form | Liquid |
| Colur | Brown |
| Odour | Slightly ammoniaical |
| Melting Point | Undetermined |
| Boiling point | 100°C |
| Flashpoint | >100˚C |
| Density (20 °C) | 1,03 g/cm³ |
| Miscibility in water | Fully miscible |
| pH (20°C) |
8 |
