Skip to main content
RXSOL Zyme DPC
House / HOTEL & CATERING

RXSOL Zyme DPC

SKU: RXSOL-15-1497-010

Rxsol Zyme DPC is a concentrated biologically active powder formulation containing a blend of patented bacterial strains, specifically developed to deal with sewage wastes. It is packed as water soluble sachets (Solupac).

Enquire Now

Application

How it Works

Rxsol Zyme DPC is formulated to degrade excess residual organic waste products causing blockage, or slow draining in sinks, showers, scuppers, drains, etc. The specialized bacterial strains and enzymes in Rxsol Zyme DPC will digest grease, fats, starch and other organic compounds. The bacteria in Rxsol Zyme DPC will colonies the waste soil, which lines the pipe work system, and degrade the waste all the way down to carbon dioxide and water, until the system is clean. On draining to the holding tank or sewage treatment plant, Rxsol Zyme DPC will greatly enhance the biological activity breaking down solids and removing obnoxious odors which can vent back through the systems.

Directions of Use and Dosage Rates

Pipe Cleaning

Maintenance dosing will keep sinks, scuppers and waste food disposal units clean, clear and odor free. A liquid solution should be prepared by adding one solupac to 10 liters of hand hot (35°C) fresh water and left for 15 minutes (stirring periodically) for the bacteria to activate. Initial doses of 0.5 liters of this solution should be applied into sinks, scuppers, drains, waste food disposal units, etc. A maintenance dose once or twice a week can then be applied to keep the pipes in clean condition. Harsh toxic cleaners (acids, caustics, disinfectants) should not be used as these will kill off the bacterial action in the pipes. Before plumbing work for pipe modification or retrofits, pipes can be cleaned by isolating the system and filling pipes with the solution for up to 48 hours before draining. If necessary, further applications should be made until drains run clean.

Holding Tanks

Organic wastes can be kept liquid and pump able. Tanks can be cleaned without manual entry and without the use of harsh toxic cleaning chemicals. Prepare a solution of one solupac to ten liters of hand hot (35°C) fresh water and left for 15 minutes (stirring periodically) before dosing into the holding tank once or twice a week. The dose rates should be approximately one solupac per 1000 liter waste in the tank. Tank cleaning should be carried out using Rxsol Zyme 700FN.

Dosage


Technical Specifications

APPEARANCE

Tan, saw dust like powder in sealed

solupacs

pH, in conc

N/A

COMPATIBILITY

 

Metal

No known effect

Rubber

No known effect

Synthetic rubber

No known effect

About

RXSOL — Uganda Chemical is the East African supply arm of RX Marine International (RXSOL), supplying industrial chemicals and solvents since 1996. We deliver bulk solvents, degreasers, acids and alkalis, glycols, water-treatment chemicals, and laboratory reagents to customers across Uganda and the wider East African region.

Contact info

Industrial chemicals & solvents supplier since 1996.

mail@ugandachemical.com
+91 80699 76670

Featured Post