Uganda Chemical is one of the leading Turbo Cleaner Dry Walnut Shell Cleaner Exporters, Manufacturers, Suppliers, and Producers in, Arua, Lira, Gulu, Soroti, Moroto, Tororo, Iganga, Jinja, Masaka, Luwero-Nakaseke, Nakasongola, Mbarara, Bushenyi, Kabale, Kasese, Fort-Portal, Hoima, Rakai and Mubende Kampala Uganda.
Turbo Cleaner Dry Walnut Shell
SKU: RXSOL-16-1035-010
Walnut Shell supplier and exporter from India to the Middle East, Turkey, Russia, and Canada. Walnut Shell abrasive is a hard and fibrous product made from crushed walnut shells in accordance with International Trade Standard. Our major stock mesh property of walnut is as follows.
The Walnut Shell Abrasives can be used in cleaning and blasting Molds, Apparatus, Plastics, Gold and silver jewelry, Glasses, Watches, Golf Club, Barrette, Buttons, etc as blasting materials, polishing materials, and also can be used in producing Grinding Wheel as the materials of forming air hole.
Alias:
Turboblaster, Asteroids, DRY WALNUT SHELL FOR TURBOCHARGER CLEANING.
Application:
Removal of paint, flash, burrs, and other flaws in plastic, alloy die casting, and electronics.
I am cleaning automotive parts.
Cleaning aircraft engines and turbines.
Removing graffiti.
Architectural cleaning and restoration of steel, wood, brick, stone, or concrete.
Polishing and cleaning of fine metals and alloys.
Using Procedure:
Walnut shell is soft abrasive for industrial use. Walnut Shell has excellent durability.
Walnut shells are also used to blast clean and polish soft metals, glass, fiberglass, wood, plastic, and stone.
Walnut Shell is used in both tumbling and vibratory applications for polishing gems and jewelry. It also works as a de-burring and de-flashing product for molding, casting, and electrical parts.
Walnut Shell is ground to various sizes ranging from coarse to extra fine, allowing for an acceptable degree of control over the desired finish. Like other soft media, Walnut Shell cleans and removes matter from surfaces without damaging the underlying material.
Advantage
The particle meets the international standard.
Low hardness, not contain silicon,
Better toughness and elasticity
Clean metal surface. (Alloys, electronic plastic parts) and will not damage the surface.
used with silicon carbide availably.
The agricultural products, are non-toxic, not hurt the body.
It the biodegradable, and recycled, reducing the environmental burden.
When removing paint, it can not hurt primer.
With UR resin grain similar purposes.
Long Lasting
Excellent for de-flashing and de-burring
Excellent for wheel blasting, air blasting, and tumbling
Soft, will not cause pitting (excellent for jet engine parts, turbines, pistons, etc.)
Usage
Walnut sand is applied to clean the molds, instruments, motors, plastics, gold and silver jewelry, watches, glasses, golf clubs, hairpins, buttons, and other surfaces.
blast cleaning: used for a variety of surfaces, such as the oxide layer, paint layer, and chemical materials to remove rust, paint, and other dirt.
Remove the old paint on the surface of aluminum or wood, remove the glue out of electronic parts and aluminum, zinc dies casting burrs, clean aircraft engines, steam turbines, and glass fiber.
Application:
1. Oilfield oily sewage treatment, degreasing, and suspended solids;
2. Industrial oil-containing industrial water treatment, degreasing, and suspended solids;
3. Domestic and industrial water treatment, remove suspended solids from water and improve water quality;
4. Biodegradable and reduce environmental burden;
5, in addition to the topcoat, can not hurt the primer and substrate;
6, in addition to the old paint on the surface of aluminum or wood, efficient removal of cleanliness;
7. Effectively remove the overflow of electronic parts;
8, in addition to aluminum or zinc die-cast workpiece burrs;
9. Clean the aircraft engine and steam turbine;
10, glass fiber hull removal of paint;
11, outdoor large statues and wall cleaning.
As Abrasive Material:
1. Pearls and jewels polishing
2. Electronic components polishing and deburring
3. Punching parts polishing and deburring
4. Spectacle fittings polishing and deburring
5. Button polishing and deburring
As Cosmetic Grade :
walnut shell is soft abrasive compatible with anionic, non-ionic, and cationic surfactants.
The cosmetic grade of the walnut shell is either natural or has rounded edges for a smoother feel.
Walnut Shell Filter Media /Crushed Walnut Shell / Walnut Shell Blasting / Walnut Shell Powder / Walnut Shell Media
When you order in our company, we will immediately arrange shipment and update your tracking information by email. In addition, we can also arrange door-to-door service delivery to your office or factory directly by our forwarders. For more information or to request a particular product, call customer services or the Given website Email address.
MAIL@UGANDACHEMICAL.COM
