Passivation
Passivate - 1 SS Cleaner
SKU: RXSOL-68-6806-005
Superficial rust, oil, grease and lime deposits can occasionally appear on any stainless steel surface. Cleaning with Rxsol Passivate 1 eliminates these spots with ease, restoring the surface and returning your stainless steel to its original lustrous look, feel and finish.
Application
Rxsol Passivate 1 is intended for a wide range of industrial cleaning applications, it offers a good general cleaning result on stainless steel surfaces.
Dosage
Rxsol Passivate 1 can be used in combination with Passivation Spray , which helps to remove free iron from the surface and regenerate the protective layer in the stainless steel by speeding up the passivation process.
1. Apply the Cleaner with a brush or by spraying or dipping.
2. When spraying, use an acid-resistant pump.
3. Leave the fluid to work 15 to 30 min at room temperature.
4. Rinse thoroughly with a high-pressure water jet. Treat the waste water before discharge
Technical Specifications
|
Appearance |
: |
Transparent liquid |
|
Odour |
: |
Slight smell |
|
Boiling point |
: |
80-100oC |
|
Flash point / Explosion properties |
: |
Not applicable |
|
Specific temperatures |
: |
Solid-fluid 0oC, Fluid-gas 80-100oC |
|
Vapour pressure at 20oC |
: |
0.01 kPa |
|
pH |
: |
0,6 at 20oC |
|
Density |
: |
1.1 g/cm3 at 20oC |
|
Solubility in water at 20oC |
: |
100 weight % |
